Por favor, use este identificador para citar o enlazar este ítem: http://repositoriodigital.ipn.mx/handle/123456789/13213
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.authorBello Pérez, Luis Arturo-
dc.date.accessioned2013-02-19T08:44:16Z-
dc.date.available2013-02-19T08:44:16Z-
dc.date.issued2013-02-19-
dc.identifier.urihttp://www.repositoriodigital.ipn.mx/handle/123456789/13213-
dc.descriptionhttp://onlinelibrary.wiley.com/doi/10.1002/star.201000113/abstractes
dc.description.abstractTaro starch was isolated from Mexican variety and its morphological, physicochemical, and molecular characteristics were evaluated. Yield starch (in dry basis) was 81%, and this starch had low AM content (2.5%). Taro starch granules showed a mixture of shapes with sizes between 1 and 5 µm. Taro starch presented an A-type XRD pattern with a crystallinity level of 38.26%. Solubility and water retention capacity did not change in the temperature range of 50–70°C and thereafter they increased as temperature increased too. Taro starch showed high peak viscosity due to its high AP content. The peak temperature of gelatinization of taro starch was 80.6°C with an enthalpy value of 10.6 J/g, with low retrogradation rate due to its low AM content. Weight-average molar mass (Mw) and gyration radius (Rz) of taro starch were 1.21 ± 0.8 × 109 g/mol and 424 ± 70 nm, respectively. Taro tuber could be an alternative for starch isolation with functional and physicochemical characteristics for food and non-food applications.es
dc.language.isoenes
dc.titleISOLATION AND PARCIAL CHARACTERIZATION OF MEXICAN TARO (COLOCASIA ESCULENTA) STARCH.es
dc.typeArticlees
dc.description.tipoPDFes
Aparece en las colecciones: Publicaciones

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Articulo 2-2011.pdf183.38 kBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.