Por favor, use este identificador para citar o enlazar este ítem: http://repositoriodigital.ipn.mx/handle/123456789/11690
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.creatorMinor-Perez, Esteban-
dc.creatorMendoza-Serna, Rogelio-
dc.creatorMendez-Vivar, Jose-
dc.creatorQuintana-Zavala, Delia-
dc.creatorPless, Reynaldo-
dc.creatorTorres-Robles, Roberto-
dc.date2012-03-29T21:00:33Z-
dc.date2012-03-29T21:00:33Z-
dc.date2006-01-31-
dc.date.accessioned2013-01-16T16:41:30Z-
dc.date.available2013-01-16T16:41:30Z-
dc.date.issued2013-01-16-
dc.identifierJ Porous Mater-
dc.identifier1573-4854-
dc.identifierhttp://hdl.handle.net/123456789/1213-
dc.identifier.urihttp://www.repositoriodigital.ipn.mx/handle/123456789/11690-
dc.descriptionAn experimental strategy was developed to obtain transparent Si-Al-Ti-Ni-Mo and Si-Zr-Ti-Ni-Mo sols via the sol-gel process. The solwas prepared from Si(OEt)4 (TEOS), Al(OBus)3 (OBus: C2H5CH(CH3)O), Ti(OEt)4 (OEt: OCH2CH3), Zr(OPrn)4 (OPrn:OCH2CH2CH3). In both cases nickel nitrate hexahydrate (Ni(NO3)2 · 6H2O) and ammonium heptamolybdate tetrahydrate ((NH4 )6Mo7O24 · 4H2O) were the Ni and Mo sources, respectively. The sols were characterized by Fourier Transform Infrared Spectroscopy (FTIR). Assignments of the simultaneous formation of the Si-O-Al, Si-O-Ti, Si-O-Ni, and Si-O-Zr bonds were done. The sols were polymerized at room temperature (293 K) to obtain gels, and these were dried at 423Kand calcined at 573, 853 and 893K in air. The characterization techniques used were small-angle X-ray scattering (SAXS), X-ray diffraction (XRD), scanning electron microscopy (SEM), and 29Si Present address: Facultad de Estudios Superiores Zaragoza, U.N.A.M., Batalla del 5 de Mayo s/n esq. Fuerte de Loreto, Col. Ej´ercito de Oriente, M´exico D. F., 09230, M´exico E. Minor-P´erez ( ) · D. Quintana-Zavala CICATA-IPN, Unidad Legaria, M´exico, D.F., 11500, Mexico e-mail: mypes6@yahoo.com.mx R. Mendoza-Serna FES-Zaragoza, UNAM, M´exico, D.F., 09230, Mexico J. M´endez-Vivar Universidad Aut´onoma Metropolitana-Iztapalapa, Depto. de Qu´ımica, A.P. 55-534, M´exico, D.F., 09340, Mexico R. C. Pless CICATA-IPN, Unidad Quer´etaro, Qro., 76040, Mexico R. Torres-Robles Instituto Mexicano del Petr´oleo, Programa de Ingenier´ıa Molecular, M´exico D.F., 07730, Mexico and 27Al magic angle spinning nuclear magnetic resonance (MAS NMR). The density of the solidswas measured following ASTM method D-4892 and the porosity and surface area were determined byN2 adsorption/desorption isotherms. The corresponding average pore diameters were evaluated using the BJH, HK, and DA methods.-
dc.descriptionInstituto Politecnio Nacional, UNAM-DGAPA-
dc.languageen-
dc.publisherJournal of Porous Materials; Espringer-
dc.relation;13, 13-19-
dc.subjectSol-gel-
dc.subjectSiO2-Al2O3-TiO2-NiO-MoO3-
dc.subjectSiO2-ZrO2-TiO2-NiO-MoO3-
dc.subjectporous materials-
dc.titlePreparation and characterization of multicomponent porous-
dc.typeArticle-
Aparece en las colecciones: Doctorado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
J_Porous_Mat_13_2006_13_19.pdf289.28 kBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.